| |
| |
|
|
|
|
|
The new temperature configurator |
|
| |
|
 |
|
| |
|
|
|
From sensor to system
A complete temperature measurement system usually consists of several components.
The temperature in a medium (for example a liquid) is detected by a sensor and is converted into an electrical measured signal.
The mechanical design and the dimensions of the sensors must vary to enable use for different media and measuring points. Depending on the application ifm electronic offers a selection of robust probe sensors (or cable sensors). To indicate and process the measured value the sensor is connected to a separate control monitor. It indicates the measured value on the integrated display.
For further processing, freely programmable switching outputs or the conversion into analogue signals are also available for the user. Control tasks are either easily processed "on site" or by a superior process control system.
To complete the modular systems ifm electronic offers compact temperature sensors with integrated control monitors.
Operation of the temperature configurator
With the temperature configurator you can configure easily and flexibly your modular sensor system for your special application. The selection logic of the configurator supports you with the configuration and ensures that only matching parts are combined.
 ifm temperature configurator
|
|
|
|
