You probably do not come from: United Kingdom. If necessary, change to: United States
Service hotline 0208 213 2222
  1. Products
  2. Sensors
  3. Speed sensors
  4. Compact speed monitors for hazardous areas
  5. DI103A

Compact evaluation unit for speed monitoring

DI103A

DIA2010-ZROA/5-3600 I/MIN/3D

Compact evaluation unit for speed monitoring

DI103A

DIA2010-ZROA/5-3600 I/MIN/3D

  • For applications in hazardous areas
  • Reliable non-contact monitoring of the rotational speed with regard to underspeed
  • 2 in 1: speed sensor and evaluation in one compact housing
  • Easy setting of the switch point via potentiometer
  • For direct connection to a PLC
  • ce
  • ukca
  • ex
Product characteristics
Output function normally open
Sensing range [mm] 10
Dimensions [mm] M30 x 1.5 / L = 80
Application
Application simple evaluation of rotating and linear movement with regard to underspeed; blocking
Electrical data
Nominal voltage AC [V] 20...250
Nominal voltage DC [V] 20...250
Nominal frequency AC [Hz] 45...65
Protection class II
Reverse polarity protection yes
Outputs
Total number of outputs 1
Output function normally open
Max. voltage drop switching output DC [V] 7.5
Minimum load current [mA] 6
Max. leakage current [mA] 1.5
Permanent current rating of switching output AC [mA] 200
Permanent current rating of switching output DC [mA] 100
Short-time current rating of switching output [mA] 2200; (20 ms / 0,5 Hz)
Short-circuit proof no
Overload protection no
Detection zone
Sensing range [mm] 10
Sensing range adjustable no
Real sensing range Sr [mm] 10 ± 10 %
Operating distance [mm] 0...8.1
Measuring/setting range
Setting range [Imp/min] 5...3600
Measuring principle inductive
Accuracy / deviations
Correction factor steel: 1 / stainless steel: 0.8 / brass: 0.5 / aluminium: 0.5 / copper: 0.4
Hysteresis [% of Sr] 10
Response times
Start-up delay [s] 12
Max. damping frequency [Imp/min] 4800
Software / programming
Adjustment of the switch point multiturn potentiometer
Operating conditions
Ambient temperature [°C] -20...60
Storage temperature [°C] -25...60
Protection IP 65; IP 67
Tests / approvals
Approval IECEx BVS 17.0094X
ATEX marking II 3D Ex tc IIIC T80°C Dc X
EMC
EN 60947-5-2
MTTF [years] 491
Mechanical data
Weight [g] 314
Mounting flush mountable
Dimensions [mm] M30 x 1.5 / L = 80
Thread designation M30 x 1.5
Materials brass special coating; PA; TPE-U
Displays / operating elements
Display
switching status 2 x LED, yellow
Electrical connection
Required protection miniature fuse to IEC60127-2 sheet 1; ≤ 2 A; fast acting; Place the fuse outside the hazardous area.
Accessories
Items supplied
lock nuts: 2
Remarks
Remarks
Recommendation Check the safe functioning of the unit after a short circuit.
Electrical connection
Connection Cable: 2 m, PUR; 2 x 0.5 mm²